E type thermocouple wire
TYPE E (CHROMEL vs Constantan) may be used in oxidizing, inert or dry reducing atmospheres, or for short periods of time under vacuum. Must be protected from sulfurous and marginally oxidizingatmospheres. Produces the highest EMF per degree o any standardized thermocouple.
1. Chemical Composition
Material | Chemical composition (%) | ||||
Ni | Cr | Cu | Mn | Al | |
EP(Chromel) | 90 | 10 |
|
|
|
EN(Constantan) | 45 |
| 55 |
|
|
2. Physical properties and Mechnical properties
Material | Density (g/cm3) | Melting point℃ | Tensile Strength(Mpa) | Volume resistivity (μΩNaN) | Elongation rate (%) |
EP(Chromel) | 8.5 | 1427 | >490 | 70.6(20℃) | >25 |
EN(Constantan) | 8.8 | 1220 | >390 | 49.0(20℃) | >25 |
If you have relevant questions, Tianqi, as your trusted partner, is committed to providing you with the resources you need to reach the next level.
Contact Us